H4080-250 Vertical sawing machine for longitudinaltransverse cutting

1. Equipment name H40/80-250 vertical metal band saw machine 2. Equipment usage: Mainly used for sawing various large diameter and large cross-section cast steel ingots or pipes, forged steel parts and various shafts. 3. Sawing materials: various common metal materials, mold steel, non-ferrous metal pipe fittings, bars, etc.

Categories：

Vertical sawing machine for longitudinal/transverse cutting

86-13587196888

Equipment overview:

1. Equipment name H40/80-250 vertical metal band saw machine

2. Equipment usage: Mainly used for sawing various large diameter and large cross-section cast steel ingots or pipes, forged steel parts and various shafts.

3. Sawing materials: various common metal materials, mold steel, non-ferrous metal pipe fittings, bars, etc.

4. Equipment process description: The material to be sawed is hoisted to the material rack by the lifting equipment → hydraulically lifted → the sawing part moves to align with the sawing line and stops → the saw carriage moves quickly and stops when it is close to the workpiece → start the host and start sawing → automatically stop after sawing in place → the saw carriage retracts quickly to unload the workpiece → the end of the process.

Main technical requirements and parameter table

1. Design and manufacturing standards

JB/T9930.2 "Vertical Band Sawing Machine Accuracy"

JB/T9930.2 "Technical Conditions for Vertical Band Sawing Machine"

GB16454 "Technical Requirements for Safety and Protection of Sawing Machines"

GB5226.1-2002/IEC60204-1: 2013 "Machinery Safety - Machinery and Electrical Equipment Part 1: General Technical Conditions"

Equipment manufacturing technology "Technical Agreement" signed by both parties

The company has passed ISO9001 series certification. With a complete quality control system.

Need detailed technical requirements:

serial number	Name and technical requirements	unit	Values and remarks
1	Basic conditions of the equipment (usage conditions and power parameters)	Power supply: Voltage: 380VAC±10% 50Hz±1Hz three-phase AC Temperature: maximum temperature 45℃, minimum temperature -5℃ Altitude: less than or equal to 1000m
2	Maximum cutting range of equipment: height × width × stroke	mm		400×800×2500
3	Sawing blank diameter	mm		Φ400
4	Saw band specifications: length × width × thickness	mm		6220411.3
5	Verticality of end face of sawing workpiece	mm		Vertical: Better than 0.3/100
6	Machine operating noise	db		<85
7	Saw band speed	m/my		15-70 frequency conversion speed regulation
8	Sawing feed speed	mm/min		Stepless speed regulation
9	Fuel tank volume	L		60
10	Total machine weight (main machine)	KG		9100
11	Machine size	mm		555044503010
12	load bearing	t		30T
13	Total motor power	kw		5.5
14	Machine operation method	Smart touch manual control + remote control
15	Sawing machine feeding method	Hydraulic feeding, single stroke 500mm,

Main key parts configuration table

serial number	Name Specification Model	Supplier
1	Main components of hydraulic system	Taiwan Seven Seas
	Oil pump motor	Taiwan Qunce, Ansong pump head
2	Electronic control system
	(1) Frequency converter	Taiwan TECO
	(2) Low-voltage electrical appliances	Tianzheng, Chint, Schneider
	(3) Spindle bearing	NSK/Harbin axis
3	guide	Taiwan Dinghan

Band saw machine performance and structure:

●The band sawing machine has the characteristics of novel structure, reasonable layout, stable performance, simple operation and convenient maintenance;

●The main control system adopts advanced PLC module control unit, high-performance human interface design and complete module device;

●The main transmission machinery has stepless speed regulation and operates smoothly; the mechanical feed is controlled by frequency conversion speed regulation and the low-speed performance is stable;

●The upper guide arm adopts hydraulic lifting and lowering control, which is easy to operate;

●Special accessories: Infrared laser marking line locator, which can conveniently and accurately locate the required size;

WorkshopThe company covers an area of over 4000 square meters and currently has nearly 28 registered employees, including 22 engineering and technical personnel, including 2 with senior professional titles. The company currently has an annual production capacity of 200 high-performance horizontal sawing machines and around 100 large vertical sawing machines. In 2021, our company's output value reached 22 million yuan. Our company has undergone continuous transformation, improvement, and development, and has become a company with a certain scale, advanced technology, and first-class products.
Our technical personnel have many years of production and manufacturing experience in Taiwanese sawing machine enterprises, specializing in the production of high-performance vertical and horizontal sawing machines. Our main products include the H7050, H1065, H1310 series of horizontal sawing machines and the HJ0408, HJO815, HJ1213, HJ1513, HJ1820, HV0626 series of high-performance vertical sawing machines.